H-Pool swimming pool units

Integrated dehumidification, cooling, heating
Heat pump circuit with electronic expansion valve
Measuring and control system


Usage and working conditions

H-Pool swimming pool air-conditioning units provide complex optimization of air in one unit suitable for dehumidification in swimming pool areas and for energetically balanced installations where a high efficiency plate exchanger with and heat pump is used. Furthermore they are suitable in places where it is necessary to cool space but it is not possible to place the condensation unit outside, or for any other applications where easy assembly and placement putting into operation is important. The units are produced in a design suitable for internal spaces.


H-Pool units are made of frameless sandwich panels. The shell of the panel consists of two steel-coated plates with a thickness of 0.8 mm, peripherally connected by single cap rivets. The outer cover of the unit is finished in shade RAL9002 – elephant bone. Inside the panel is mineral wool insulation with volume weight 50 kg/m³, inflammability level A1. The thickness of the panel is 50 mm. The strength of the chamber is ensured by special joints registered with the Industrial Property Office in its data-base of industrial designs.


Air-conditioning units are manufactured units. The units are designed for installation on the floor, and are delivered with a base frame in two transportable blocks. Exchanger output pipes, all other fittings and service openings are located on the front of the unit. Access to fans, filters and compressors is provided through a service door. It is necessary to leave free service space in front of the unit in an area equal to 1.15 % of the depth of the unit. In front of the electricity distribution panel on the side it is necessary to leave free space of 800 mm.

H-control system of measurement and regulation

The units are equipped with the MaR H-Control autonomous controlling system. This system is easy to operate by PC and web browser. Furthermore it is possible to control the unit via a remote control with LCD display or Building Automation and Control (BAC) systems. Controlling and action components are assembled, connected and tested during production. The system thus enables:

  • smooth fan operation control
  • control and protection of water heating
  • control and protection of plate heat exchanger
  • control of flaps
  • signalization of air filters clogging
  • heat pump compressor control

Function diagram of the H-Pool unit

Product documents

Product sheet


C.I.C. JAN HŘEBEC s.r.o.
Na Zlaté stezce 1075
Tel.: +420 326 531 311
263 01 Dobříš
Czech Republic

Back to Top
Enter your Infotext or Widgets here...